FAG single row angular contact ball bearing characteristics and suffix meaning

Features With a few exceptions, FAG single row angular contact ball bearings are inseparable bearings consisting of solid inner and outer rings, ball and cage assemblies. The raceways of the inner ring and the outer ring are offset from each other in the axial direction of the bearing. The angular adjustment function of this kind of bearing is very limited. Radial and axial load carrying capacity Single row angular contact ball bearings are capable of withstanding uniaxial and radial forces. It must be axially adjustable with respect to the other bearing. The axial load capacity depends on the contact angle. Bearings with a contact angle of 40° can withstand greater axial loads compared to bearings with a contact angle of 30°. Sealing this type of bearing is not sealed.

  Lubricating single row angular contact ball bearings can be greased or oil lubricated. Operating Temperature Open angular contact ball bearings operate from –30 °C to +150 °C. Bearings with an outside diameter D 240 mm maintain dimensional stability up to +200 °C. Cage The standard series for this type of bearing is a ball-guided brass solid window cage with the suffix MP. Suffixes that are MPA or MPB(S) bearings represent brass solid window cages that are guided by the outer ring or inner ring. Suffixes of existing standard design suffix types: See table. Existing Design Suffix Description Design B Improved Internal Structure Design Standard Design MP Brass Body Cage Standard Design P5 Bearing Special Design for P5 Bearings M15 Special design with measurement report, J15 actual data tag Obtained through protocol.